Livolo Touch Smart Dimmer Switch with Glass Faceplate in All-White

Livolo wireless dimmer switch module with glass cover in solid white

This is a simple Livolo wireless dimmer switch for switching a light or group of lights on and off, as well as dimming them.

The wireless function allows control via remote control or via app (everHome App) using the everHome CloudBox as a gateway.

The glass cover gives this switch with modern sensor technology a truly eye-catching look.

Easy and quick installation, both vertically and horizontally.

The light switch is operated by lightly touching the circular surface. The contour of the touch surface is subtly illuminated, making it easy to operate at any time of day. This makes it especially easy to find the switch in the dark. In the on position, the border of the touch panel lights up red, and in the off position, blue.

To adjust the brightness of the light(s), press and hold the touch surface until the desired brightness is set.

Our touch light switches can be used with all types of lamps, including incandescent bulbs, halogen bulbs & energy-saving bulbs. Exception: LED strips.

This is a trailing edge dimmer.

Attention: No load resistor should be used with this dimmer. Overloading may occur.

You do not need a load resistor for our LED ceiling spotlights!

The LED ceiling spotlights are compatible with all our Livolo switches.

See under: Miscellaneous > LED Lights

In our shop you will also find spreading claws (LG-01) in a pack of 2, for flush-mount boxes without screw mounting. Suitable for hollow walls and older houses (built before 1970). When using spreading claws, 68 mm flush-mount boxes are better suited.

The modules are attached to the flush-mount boxes with screws using the included metal frame.

Replacement is carried out like with other rocker switch manufacturers. Simply replace your old rocker switches with a new, durable design. The wiring remains the same.

The light switch and socket modules are suitable for flush-mount boxes with a diameter of 60-68 mm. The hole spacing for multiple covers is 71 mm.

With us you get the complete Livolo range; from a simple rocker light switch to a smart home-enabled touch roller shutter switch.

Questions? Call us or send us an email.
We are happy to advise you!

Technical data:

Operating voltage: AC110~250V, 50Hz60Hz

max. current per gang: 2.5A

Power load: 2000W

max. power per gang: 500W/220V or 250W/120V

min. power per gang: 20W/220V

Standby power consumption: less than 0.1mW

Service life over 100,000 cycles

Dimensions:

80 x 80 x 34 mm

Scope of delivery:

The delivery includes:

· 1 x Livolo touch switch internal module, as ordered

· 1 x Livolo glass cover, single, as ordered

· User manual

Installation info: the connection is made WITHOUT power and the glass cover, after installation you can place the glass cover and switch the power back on. Let the touch switch rest for 3 minutes before operating it. After this time has elapsed, the light switch can be operated. If you do not follow these instructions, the light switch may not respond.